CC-100 Cabinet Controller

The CC-100 is a wireless control and monitoring unit for street-lighting cabinets. It supports cabinet-based operation, remote supervision and flexible control of lighting areas with both connected and non-connected streetlights.

Key features

  • Controls up to three contactors separately
  • Supports mixed installations with connected and non-connected streetlights
  • Provides three-phase mains supervision
  • Can be combined with an electricity meter for cabinet-level monitoring
  • Supports power-related alarms, including high and low power per phase
  • Connects to I/O signals such as contactor feedback, twilight relay, lux sensor, manual switch state and cabinet door status
  • Uses decentralised Wirepas RF mesh communication as part of the GreenStreet network

Expand the boxes below by clicking the  + 

Power Supply: 3W+N+PE, 230/400 VAC; only 1 phase required, 90–265 VAC, 50/60 Hz

Connectivity: RF mesh 2.4 GHz with integrated PCB antenna; optional external antenna.

Operating Temperature: -40 to +60 °C

Housing: IP30 rated

Length: 105 mm

Width: 57 mm

Height: 86 mm

Weight: 300 g

Approvals: RED Directive 2014/53/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU, LVD Directive 2014/35/EU

Radio: EN 301 489-1, EN 301 489-17, EN 300 328 ver. 2.2.2

EMC: EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN 61000-6-2, IEC 61000-6-3

Safety: EN IEC 62368-1:2020+A11, Overvoltage Category II

Altitude: Max 2000 m. For higher altitudes, contact Capelon